How To Install Westhollow Cork Flooring

by admin on July 14, 2009

Hello there! If you are new here, you might want to subscribe to the RSS feed for updates on this topic.

iFLOOR.com shows hοw dο-іt-yourselfers саn install thеіr οwn pre-fіnіѕhеd cork flooring frοm Westhollow.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

{ 5 comments }

happybob9000 July 14, 2009 at 9:33 am: Terrific video about cork flooring installation!
binzin05 July 14, 2009 at 9:33 am: thnak you that was good informations.if you think you have more to tell me will be good.
thank you again
ifloorDotCom July 14, 2009 at 9:33 am: This particular cork flooring is a click-together floating floor which requires no glue. These floors are far more installer friendly as they require less time and work to complete.

Cork flooring can not be refinished like traditional wood floors, but they can be re-screened. Screening is a process where you will buff the top layer of finish (typically with 220 grit sand paper), then apply new layers of finish over the top of the floor and remaining original finish.
binzin05 July 14, 2009 at 9:33 am: thank you for tis video.
i have some questions and i hope you can help.
is cork can be finished?(sand and finish?)
i see you didn;t glue it is what you showed don’t need to be glued down?
thank you again and i hope you can answer and if you have any other advises wil be nice to tell us.
refinedhardwood July 14, 2009 at 9:33 am: Check out our videos!!!

Comments on this entry are closed.